Y
Civil Engineer - $50,460 - $80,243 per year (GS 7 - 9)
Engineering and Architecture
Civil-Engineerin-Urban-planning
Engineer
Permanent
Full Time
1-3
DOE
Direct Employer
Duties:
The responsibilities listed are at the full performance level.
Plan and conduct civil engineering projects according to clear and specified objectives.
Investigate various routes and locations for proposed roads and trails using aerial photos and topographic maps.
Prepare design criteria for smaller or less complex portions of conventional roads, facilities, utility systems, or structures.
Conduct preliminary surveys and site investigations to obtain baseline and field data on soils, topography, drainage, existing structures and utilities, and feasible layout of proposed roads, facilities or structures in relation to terrain.
Participate in field surveys and investigations of existing facilities and utility systems to ensure that maintenance and repair schedules and procedures conform to safety, health, and regulatory requirements.

Requirements:
Conditions of employment

Must be a U.S. Citizen or National.
Males born after 12-31-59 must be registered for Selective Service or exempt.
Subject to satisfactory adjudication of background investigation and/or fingerprint check.
Per Public Law 104-134 all Federal employees are required to have federal payments made by direct deposit to their financial institution.
Successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit E-Verify.
As a condition of employment for accepting this position, you will be required to serve a 1-year probationary period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider: your performance and conduct; the needs and interests of the agency; whether your continued employment would advance organizational goals of the agency or the Government; and whether your continued employment would advance the efficiency of the Federal service. Upon completion of your probationary period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.

Qualifications:
In order to qualify, you must meet the eligibility and qualifications requirements as defined below by the closing date of the announcement. For more information on the qualifications for this position, visit the Office of Personnel Management's General Schedule Qualification Standards.

Your application and resume must clearly show that you possess the experience requirements. Transcripts must be provided for qualifications based on education. Provide course descriptions as necessary.

Basic Requirement:
See Education for the Individual Occupational Requirements for the 0810 Series.

In addition to meeting the basic requirement listed above, you must also possess experience and/or directly related education in the amounts listed below.

Specialized Experience Requirement:
For the GS-07 Level: Applicants must have one year of specialized experience equivalent to at least the GS-05 grade level;
OR
Applicants must have one full year of graduate level education (coursework directly related to position being filled);
OR
Superior Academic Achievement (click the link to determine if you are eligible: http://www.opm.gov/qualifications/policy/ApplicationOfStds-04.asp);
OR
Successful completion of a 5-year program of study of at least 160 semester hours leading to a bachelor's degree in engineering;
OR
An appropriate combination of graduate level education and specialized experience. Professional engineering experience is defined as nonroutine engineering work that required and was characterized by (1) professional knowledge of engineering; (2) professional ability to apply such knowledge to engineering problems; and (3) positive and continuing development of professional knowledge and ability.

Qualifying specialized experience is defined as one or more of the following:

Assisted with the completion of location surveys for roads or bridges or trails, generally after route and control point selection by a higher grade engineer;
Assisted with field surveys, topographic maps, and specific locations for such items as water distribution systems, wastewater treatment systems, parking areas, campsites, and other minor structures;
Completed field reviews for adequacy and structural soundness of plans and specifications presented for minor construction;
Assisted with the inspections of contract construction for roads or bridges or buildings or other structures ensuring compliance with plans or specification or other contract terms; and/or
Assisted with the inspection of the condition of roads or bridges or other structures to determine maintenance and repair needs.
For the GS-09 Level: Applicants must have one year of specialized experience equivalent to at least the GS-07 grade level;
OR
Applicants must have 2 years of progressively higher level graduate education leading to a master's degree or master's or equivalent graduate degree (coursework directly related to the position being filled);
OR
Successful completion of a 5-year program of study of at least 160 semester hours leading to a bachelor's degree in engineering and 1 year of appropriate professional experience;
OR
A combination of superior academic achievement and 1 year of appropriate professional experience;
OR
An appropriate combination of specialized experience and education (only graduate education in excess of 18 semester hours may be used to qualify applicants for this grade level). Professional engineering experience is defined as nonroutine engineering work that required and was characterized by (1) professional knowledge of engineering; (2) professional ability to apply such knowledge to engineering problems; and (3) positive and continuing development of professional knowledge and ability.

Qualifying specialized experience is defined as one or more of the following:
Assisted in the design and development of routine construction drawings and specifications for projects with straightforward technical characteristics;
Assisted with site visits to ensure construction was conducted in accordance with established contract specifications; and/or
Assisted in gathering data used to monitor the progress of contractors in achieving contract requirements and project milestones such as performing basic surveys and investigations to establish baseline data used to initiate a requirements review.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Education
See above for education that may be qualifying for the specific grade level.

Basic Requirement:
GS-0810 Series:
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

Duty Locations:
• Dickinson, ND
• Watford City ND
• Bismarck, ND
Comprehensive health, dental, vision, and life insurance, retirement, 401(k), flexible schedule, paid vacation and
federal holidays off. Additional details available on the Office of Personnel Management website.

Apply online at: https://www.usajobs.gov/ (or click on the ''apply'' button).
https://www.usajobs.gov/
N
Dickinson
ND
58601
United States
ND: Dickinson